Constant Temperature And Humidity Air Conditioners Have Been Installed

Thank you for our customer's support!  Four sets of constant temperature and humidity air conditioners have been installed in the equipment room of a certain bureau, and the start-up operation is stable and good.

How does a constant temperature and humidity machine control humidity? 

1. The constant temperature and humidity air conditioner is the product placed in the specified temperature and humidity, depending on the product's high-temperature resistance, low-temperature resistance, and humidity resistance, then the constant temperature and humidity machine has the ability to heat, cool, humidify, and dehumidify at the same time.

2. Cooling is an important part of a constant temperature and humidity machine, and it is also an important parameter to determine the performance of a constant temperature and humidity machine. It includes four major components: compressor, condenser, throttling device, and evaporator. Compressor is the heart of the refrigeration system , It inhales low-temperature and low-pressure gas, turns into high-temperature and high-pressure gas, releases heat by condensing into liquid, and takes away the heat through the fan. The low-temperature and low-pressure gas then returns to the compressor; the refrigerant absorbs heat in the evaporator to complete the gasification process and absorbs heat to achieve the purpose of refrigeration to complete the cooling process of the constant temperature and humidity machine.

3. The heating device is the key link to control the temperature and humidity of the constant temperature and humidity machine; it will output voltage to the relay when it receives the heating instruction, and about 3-12 volts of direct current is applied to the solid state relay; its AC terminal is equivalent to the wire connection ; The contactor is also closed at the same time. There is voltage at both ends of the heater to generate heat. The circulating fan drives the heat to the box, so that the constant temperature and humidity machine will heat up, and the temperature will soon reach your set value; In the on-off adjustment of the solid state relay; we use the constant temperature and humidity machine to see the heating output on the screen to adjust the heat; this is the temperature control above 89 degrees, how to control the temperature stability below 89 degrees? The constant temperature and humidity machine is on the side How much power is generated by the solid state relay; the other is through the compressor refrigeration cycle to reduce the temperature to achieve dynamic equilibrium; the temperature is constant.

   
   

  4. The humidification system is roughly the same as the heating system; it is the process of the heater heating water into steam; it completes the humidification purpose of the constant temperature and humidity machine. The dehumidification system is also completed by the refrigeration system. The evaporator is placed in the constant temperature and humidity machine; it is relatively cold, and the high humidity gas in the constant temperature and humidity machine will condense into liquid when the cold object is repeated; the high humidity gas in the box will be very small. So that it can achieve the purpose of dehumidification.