Characteris And Selection Of Commercial Warehouse Dehumidifiers

             Functional characteristics and selection of commercial warehouse dehumidifiers

Commercial warehouse dehumidifiers reduce the temperature of the surface cooler below the dew point temperature of the air under the action of the compressor, evaporator, thermal expansion valve, and air cooler. The fan draws moist air into the machine and exchanges heat with the surface cooler. The water vapor in the moist air is condensed into water droplets and discharged into the body or into the water tank in the body, producing dry air and discharged into the room. This circulation reduces the indoor humidity, and the humid space gradually achieves a dry effect.

　　 I.  Functional characteristics

　　 1. Precise humidity control and powerful dehumidification. It can avoid the loss of high product defect rate caused by humid environment, and ensure that raw materials, semi-finished products, and finished products are rusted and rot caused by poor environmental humidity control.

　　2. Use the original compressor, stable operation, fast, accurate and ruthless cooling and dehumidification. Brand compressors have been tested for a long time in the market and have a long service life.

　　3. Use all-copper high-efficiency heat exchangers, which have sufficient heat exchange and high energy efficiency ratio, which not only saves energy consumption, but also efficiently dehumidifies.

　　4. Use 100% copper motor, low running noise, stable operation and long service life.

　　5. Low wind resistance carbon steel blades and exquisite fan volute are used to ensure low noise during equipment operation.

　　6. Applicable to places with high noise requirements such as family living rooms, villa clubs, offices, archives, and reference rooms.

　　 II. The selection of dehumidifiers for commercial warehouses also requires attention. The simple three points are as follows:

　　1. The relationship between humidity and temperature

　　 Two important related indicators in the air environment are temperature and humidity. Especially in the warehouse, it is necessary to adjust the temperature and humidity at the same time. In the moisture content of the air, as the temperature changes, the humidity also changes. Often in heating places, the temperature in the room rises, but the room is often very dry. This humidity is related to the temperature of the air.

　　2. Dehumidifier interface

The original pipeline and the dehumidifier can be connected to the original ventilation pipeline. The flowing air in the original ventilation pipeline is intercepted and dehumidified by the dehumidifier, and then returned to the ventilation pipeline to better control the relative humidity of the air in the original ventilation system to achieve air manufacturability or comfort ( The comfort of warehouse worker) requirements.