Desiccant Dehumidifier 320 M3/H

Features

1. High moisture removal

2. Suitable for low temperature and RH process

3. Could be used together with air conditioner

Working principle:
The core structure of the rotary dehumidifier is a rotating wheel, which is a honeycomb wheel with a moisture absorbent, made of a special composite heat-resistant material. The honeycomb rotating wheel has the characteristics of larger moisture absorption area than surface, low circulation resistance and high dehumidification efficienc.
On both sides of the wheel, a diaphragm with a high seal performance divides the entire surface into two sectors: the processing sector and the regeneration recovery sector. When processing air that needed dehumidifying enters the processing sector, the water vapor is absorbed by the carrier in the wheel and is dried, and the latent heat is released. The dry air is sent out through the fan. As the absorption of water increased, the processing sector becomes saturated. In order to maintain its stable dehumidification performance, the saturatedwheel is transferred to the regeneration sector under the drive of the motor, and the regeneration process starts. Regeneration air reached 100~140ºC by heating, then reverse blowing into the regeneration area. In the high temperature condition, the absorbed moisture in the wheel is desorbed and releases a lot of sensible heat. The temperature of itself reduced and it turns into the moist air filled with moisture which is discharged to the outside of the room in the next step, and the water transfer is finished. The powerful dehumidification capacity of the wheel is restored and continues to dehumidify in the working area. The process of dehumidification and regeneration above mentioned is occurring at the same time.

Hot Tags: desiccant dehumidifier 320 m3/h, China, suppliers, manufacturers, factory, customized, wholesale, made in China, Desiccant Wheel Dehumidifier, Commercial Desiccant Dehumidifier