How Many People Know About What Aspects Should Be Paid Attention To When Using Industrial Dehumidifiers?

How many people know about what aspects should be paid attention to when using industrial dehumidifiers?

Now, many factories and enterprises should not be unfamiliar with industrial dehumidifiers. The machines are used in many occasions and are recognized. There are many companies using industrial dehumidifiers, but what aspects do you pay attention to when using the machine, how many people know about it?

1. Determination of ambient temperature

The application range of conventional industrial dehumidifiers is 5℃-40℃. When the ambient temperature is lower than 5℃, the water droplets on the surface of the evaporator will frost, which will weaken the dehumidification effect of the machine; if the ambient temperature exceeds 40℃, the pressure in the system will increase, the compressor will be overloaded, and the compressor motor will be damaged. .

2. Use after standing still

In the process of transportation and installation of industrial dehumidifiers, vibrations, tilts and other actions will inevitably occur, resulting in the displacement of refrigerant in the compressor. If it is turned on immediately and backfilled, it is easy to burn the compressor when idling. Therefore, it is necessary to place the industrial dehumidifier for a short period of time, so that the refrigerant in the compressor can return locally, and then electrify.

3. Placement selection

Industrial dehumidifiers should be placed where the air is circulating and flat, so that moist air can be quickly pumped into the dehumidifier, and the dry air can be quickly circulated to every corner of the factory to achieve better dehumidification effects. On the other hand, the machine should not be close to the wall, because after a long time of operation, the temperature of the machine will continue to rise; the air inlet of the machine should be far away from the goods, and the goods should not be placed on the top of the machine to avoid clogging and affecting the circulation effect.

4. Suggestions on the use of electricity

After the industrial dehumidifier is turned on, try to keep it in a standby state and do not open it frequently. The Baiao industrial dehumidifier has its own temperature and humidity monitoring sensor, which can accurately and effectively control the temperature and humidity. It does not require frequent manual opening and closing after it is turned on, which reduces the damage to the performance of the machine and reduces the waste of electricity. If you do not use the machine for a long time, you can cut off the power; it is recommended to turn off the power immediately after the power is off to prevent sudden power and high current from causing sudden impact on the equipment and damaging the dehumidifier. Therefore, when the machine is connected, it is best to install an empty opening so that the power to the machine can be easily cut off.

5. Machine maintenance and cleaning

When the dehumidifier is used for a long time, the air inlet is easy to be blocked, resulting in unsmooth air intake and directly affecting the dehumidification effect. Therefore, it is necessary to clean the air inlet, outlet and filter of the dehumidifier regularly. When cleaning the filter, make sure that the power source of the machine is unplugged. Take out the filter, remove the dust with clean water, dry it in a cool place, and then put it back. Do not use corrosive chemicals to clean or shoot directly in the sun to prevent damage or deformation of the filter. If you need to clean the appearance of the machine, you can use a soft cloth to add to the soft detergent to wipe, do not directly rinse with water.