Which Humidifier Will Be Used in The Paint Shop Of The Automobile Company To Achieve Spray Dust Reduction?
Nov 10, 2021
Geely automobile spray dust reduction technical requirements:
1. The spray system equipment and pipeline accessories must not contain oil pollution which may cause shrinkage on the paint surface of the car body.
2. The nozzle structure of the humidification system is a three-position impact nozzle. The working mode is negative air pressure induction. The spray system must not spray water or drip in any unexpected water, electricity, and gas conditions.
3. Each nozzle of the humidification system is composed of two independent air-water jetting heads with a 60-degree included angle and a compressed air nozzle. The nozzle works by two independent air-water jetting heads. The water mist finally forms fine water particles after three high-speed impacts.
4. The spray volume range of each nozzle of the humidification system is flexibly adjustable, and the average particle diameter of the spray system does not exceed 8 microns when the spray system is working normally, and there must be no water droplets on the body or other phenomena that affect the production process.
5. The on-site humidification system requires uniform fog. So that a large area of water mist covers the space above the chamber. Under the premise of eliminating static electricity, it can better suppress tiny dust particles and achieve the purpose of dust reduction.
In combination with the above technical requirements, only the dry mist humidification system can achieve all the above requirements. The dry mist humidifier adopts the principle of air-water humidification, and the sprayed mist is aerosol particles, which will not wet the products and walls of the workshop. In addition, the humidifier product has features of non-blocking, zero failure, and maintenance-free are well received by automobile companies.
