Failure Analysis and Correct Selection of Nozzle for Artificial Fog Humidifier Equipment

Failure Analysis and Correct Selection of Nozzle for Artificial Fog Humidifier Equipment

There are seven common causes of problems in the use of artificial fog equipment nozzles:

Abrasion: The material on the nozzle surface and internal flow passages of artificial fog humidifier equipment gradually sheds, thereby affecting flow, pressure, and spray shape.

Corrosion: Corrosion due to chemical action of the spray solution or environmental damage to the nozzle material.

Clogging: Dirt or other impurities clog the inside of the nozzle, restricting the flow rate and interfering with the spray shape.

Bonding: On the inner or outer material of the nozzle edge, the build-up of splash, mist, or chemicals due to liquid evaporation obstructs the nozzle or internal flow path, allowing a dry cured layer to condense.

Temperature Damage: The detrimental effects of heat on nozzle materials designed for non-high temperature applications.

Improper installation: Off-axis installation, over-tightening, or changing installation position, these problems can cause leakage and adversely affect the performance of artificial fog equipment.

Accidental Damage: Accidental damage to the nozzle due to incorrect tooling during installation and cleaning.

How to choose the nozzle of artificial fog humidification equipment?

The selection of artificial fog equipment nozzles can be selected from the following aspects:

Atomization effect of artificial mist sprayer equipment nozzles. The performance of the nozzle will affect the atomization effect, and the atomization effect of the nozzle will affect the cooling effect. A good nozzle should not only provide good atomization effect, but also ensure its low consumption.

The second is the installation effect of the humidifier nozzle. Some artificial fog humidifier equipment will be installed in public leisure places, and beauty is also part of the consideration. Therefore, the selection of stainless steel nozzles can ensure the beauty and continuity of the nozzles.

The choice of air humidifier spray atomization. There are two main types of atomization: pressure atomization and pneumatic atomization. The droplets of the pressure atomizer are more uniform and the service life of the pneumatic atomizer is longer. It needs to be selected according to the specific use and environment.

Also, if outdoors, the effect of wind on the mist maker spray should be considered. Because the mist particles in the artificial fog equipment are very small and the wind force is large, the atomization effect will be greatly affected, thereby affecting the cooling effect. At this time, it is necessary to select a nozzle with a more stable atomization effect.

Hangzhou Duokai Technology Co., Ltd. is committed to the development and innovation of environmental protection technology. From technology research and development to product manufacturing, its business scope covers artificial fog, high-pressure spray, fog forest system, air treatment, disinfection and cooling, dust suppression and other products. Duokai Technology provides customers with full-process services from design survey, product customization, installation and commissioning, and after-sales service to technical support.